Portfolio
20+ Projects.
Six Continents.
A representative selection of engineering work delivered by our principal consultants — from rapid tender support to full project management through commissioning.
By Type
By Region
Onshore Gas Boosting Station — Basic Engineering
Basic engineering package and Class 4 cost estimation for an onshore gas boosting station, covering the complete compression train and ancillary systems required to lift wellhead gas to pipeline export pressure.
Block 5 MOPU — Independent Engineering Review
Independent engineering review and compliance gap analysis of a Mobile Offshore Production Unit offering for Block 5, providing the operator with an objective technical assessment ahead of the contract award decision.
Onshore Production Facility — FEED, New Zealand
FEED package for a modular production facility to be installed onshore New Zealand, designed to debottleneck the operator's existing central processing facility and accommodate ongoing field development.
Well Abandonment with Novel Bismuth Plug Technology
Engineering drawings and operating procedures for a well abandonment programme using novel bismuth plug technology — providing a tested, regulator-compliant alternative to traditional cement-based plug and abandonment.
Offshore Topside Module — Basic Engineering & Cost Estimation
Basic engineering and Class 5 cost estimation for an offshore topside module, supporting the contractor's tender for a fast-track package supply campaign.
Crude Treatment Package Engineering — Heater Treater, Coalescer & Stripper
Basic engineering and cost estimates for three discrete equipment packages delivered to a single client across the year — a heater treater, an electrostatic coalescer, and a crude oil stripper column.
100,000 BPD Seawater Injection Topside — Gulf of Mexico
Basic engineering and Class 5 cost estimation for the supply of a 100,000 BPD seawater injection topside for deployment in the Gulf of Mexico, covering the complete treatment and injection train.
MOPU Topsides Engineering — Offshore India
Basic engineering and Class 3 cost estimation for the topsides of a Mobile Offshore Production Unit operating offshore India, covering the complete process train from wellstream reception to stabilised oil and sales gas export.
Ad-hoc Process Engineering — Mayo Abo FPSO
Ongoing process engineering support for the Mayo Abo FPSO operating off the West African coast, providing rapid-turnaround simulation studies and technical memoranda directly to the offshore operations team.
Carbon-Neutral Hydrogen Production Facility
Conceptual engineering and Class 5 cost estimation for a carbon-neutral hydrogen production facility using in-situ oil as feedstock, integrating cryogenic air separation, pre-combustion CO₂ capture, hydrogen PSA purification, and CO₂ compression for permanent geological storage.
MOPU Topsides — TEG Gas Dehydration Package
Conceptual engineering and cost estimation for a triethylene glycol gas dehydration package on MOPU topsides, sized for 45 MMscfd at 70 bara inlet and a -10°C pipeline water dewpoint specification.
MOPU Topsides Engineering — Offshore Thailand
Full FEED and basic engineering for the topsides of a Mobile Offshore Production Unit in the Gulf of Thailand, covering the complete process train from 120 bara wellstream to stabilised oil, sales gas, and produced water export.
Glycol Gas Dehydration Skid — Tender Support
Tender engineering for a skid-mounted TEG gas dehydration unit targeting a 7 lb/MMscfd sales gas water content specification, sized for 25 MMscfd at 60 bara operating pressure.
Well Test Vessel — Tender Support
Process engineering tender support for an offshore well test vessel handling up to 15,000 BPD liquid and 20 MMscfd gas across high-GOR and high-water-cut well test scenarios.
Filter Scrubber Skid — Tender Support
Tender engineering for a two-phase coalescing filter scrubber skid for upstream gas inlet conditioning, sized for 30 MMscfd at 55 bara with a downstream liquid carryover specification below 0.1 mg/Nm³.
Compact Flotation Unit — 15,000 BPD
Full engineering, procurement, and commissioning management for a fast-track 15,000 BPD two-stage compact flotation unit treating produced water for Mubadala Petroleum, designed for an oil-in-water discharge specification consistently below 30 ppm.
Modular Gas Processing Facility — Assam, India
Detailed engineering and full project management for a modular skid-mounted gas processing facility for Hindustan Oil Exploration Company in Assam, designed for 35 MMscfd of wellhead gas across the complete processing train.
3-Phase Production Separator — Design & Simulation
Process design and performance simulation of a 1,800 mm ID horizontal three-phase production separator for an offshore field, sized for 8,000 BPD oil, 15 MMscfd gas, and 4,500 BPD produced water.
HP Separator Blowdown — Dynamic Simulation
Dynamic process simulation of a high-pressure production separator blowdown system, assessing depressurisation from 120 bara to 50% MAWP within the 15-minute target required by the project ESD philosophy.
Seawater Injection Module (SWIM) — 6,000 BPD
Detailed engineering, procurement, and commissioning management for a 6,000 BPD offshore seawater injection module covering the complete treatment and injection train.
Flare Radiation Study — Mozambique
Flare radiation and dispersion analysis for a greenfield onshore gas processing facility in Mozambique, covering the main production flare under maximum credible relief load, the cold vent stack, and the pilot flare.
Working on something similar?
We scope every engagement to your actual requirements — no standard packages.